Wireless Workbench обеспечивает полное управление сетевыми радиосистемами Shure, представляя собой функционально насыщенный интерфейс, охватывающий все аспекты мероприятия, включая сканирование через приёмники Shure, визуализацию РЧ-спектра и частотный расчёт.

Основные характеристики

Основные характеристики

Управление оборудованием

  • Автоматическое обнаружение сетевых устройств Shure
  • Доступны профили беспроводных устройств некоторых сторонних производителей
  • Организация и настройка параметров устройств
  • Настройка множества беспроводных устройств путём группового изменения параметров
  • Предустановки позволяют пользователям сохранять наборы параметров в файл и быстро применять их к одному или нескольким устройствам

Координация частот

  • Непрерывное или одинарное сканирование спектра через сетевой приёмник Shure
  • На частотном графике детально отображается используемый РЧ-спектр
  • Частотный расчёт для анализа и настройки частот оборудования на основе данных сканирования
  • Приоритизация и распределение спектра по каналам с использованием групп включения
  • Назначение совместимых частот на сетевые беспроводные устройства Shure
  • Управление пиками сканирования для большей гибкости и расширения возможностей профилей оборудования.
  • Интермодуляционные расстояния могут быть игнорированы в частотном расчёте
  • Порядок координации можно индивидуально адаптировать под конкретную ситуацию

Мониторинг

  • Поканальное измерение уровней аудиосигналов, радиосигналов и оставшегося заряда батарей в реальном времени
  • Пользовательские виджеты позволяют изменять отображаемые параметры каналов
  • Конфигурирование и сохранение нескольких вариантов размещения виджетов
  • Оповещение о помехах и событиях системы
  • Timeline — новая утилита мониторинга в реальном времени, предназначенная для сбора такой важной информации о состоянии каналов, как уровень радиосигнала, уровень аудиосигнала, обнаруженные помехи, мощность сигнала в ShowLink® и т.д. Данная функция позволяет сохранять результаты в отдельных файлах, позволяя пользователям архивировать и отслеживать эксплуатационное состояние своих беспроводных систем

Работа в корпоративной сети

  • Wireless Workbench поддерживает удалённое подключение устройств в различных подсетях
  • Функция контроля доступа позволяет защитить параметры устройств от несанкционированных изменений

Версии программного обеспечения

Версии программного обеспечения

Wireless Workbench 6.12.5 (Windows 7, 8, 10)

Операционная система:

Windows 7, 8, 10

Информация о выпуске:

Release Date: 9/5/2018

NEW FEATURES

  • Added support for Axient® Digital with ADX Series transmitters
  • Added support for SBC220 Networked Docking Chargers

IMPROVEMENTS

  • Support added for systems in Frequency Diversity Combined mode to enforce 1 MHz frequency separation from each channel of a Frequency Diversity pair
    • This includes the G57+ band for Axient Digital A band receivers.
  • Removed TV 53 from the Japanese TV map.
  • Numerous performance enhancements for the Monitor View and Timeline, including the resolution of issues that may have caused excess memory usage or application lagging.
  • General bug fixes

KNOWN ISSUES

  • Exporting TV exclusions to Spectrum Managers when a TV Channel Width other than 6 MHz can result in improper TV range exclusions.
  • ULX-D receivers running firmware version 2.0.28 or earlier may trigger a Settings Conflict when rediscovered after updating their firmware to version 2.1 or later. There is no issue with the device – there was simply a new property added in version 2.1. To dismiss the alert, resolve the Settings Conflict by selecting the properties you wish to keep.
  • Audio Summing reported from ULX-D receivers reports an Audio Overload on all channels instead of on the specific channel(s) experiencing the overload.
  • Timeline System Events displayed when using the Axient Digital FD-Override (in FD-S, selecting to Lock to Rx 1/2/Auto Switch) do not get displayed on both FD channels.
  • Timeline System Events displayed for Active Transmitter Online for ULXD6/8 transmitters do not always include Transmitter Device ID in the event description.
  • On Macs, when users open show files and launch the Frequency Analysis dialog (by checking the checkbox and pressing “Analyze”), the Frequency Coordination tab may stop responding to keyboard inputs (for example, editing or deleting frequencies with the keyboard). To work around this issue, select another tab in the application (e.g.: Inventory or Monitor) and then reselect the Frequency Coordination tab.
  • SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.
  • When scanning with AXT400 receivers, the Band Preset value in the Live Scan Settings dialog does not always stay in sync with the currently selected band of the receiver. The Band Preset can be manually changed to scan any supported range.
  • Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.
  • Certain bodypack portables are not compatible with SBC220 (P3RA, P9HW, and UR5), in that the charging status and other attributes cannot be remotely monitored from WWB. These bodypack portables will still be charged when using SBC220, but viewing the charge percentage or other attributes of those batteries will not be available from WWB.

NOTES

  • To operate Wireless Workbench successfully, you must run it as an administrator. (Consult your IT department if you have questions.)
  • Tags that have been added to a show file but are not assigned to any devices are not saved within the show file.
  • Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench".
  • On machines running Windows 7, Wireless Workbench will not be able to discover devices when the machine has fallen back to its 169.254.xxx.yyy fallback IP address, regardless of the IP addressing of the connected Shure devices.  To address this, perform one of the following:
    • Insert a DHCP server onto your network and set your machine and Shure devices to accept automatic IP addressing.
    • Statically assign your machine's IP address to the 169.254.xxx.yyy fallback subnet with a different IP address than the one it fell back to originally.

Wireless Workbench 6.12.5 (MAC OS X)

Операционная система:

Mac OS X 10.11-10.13

Информация о выпуске:

Release Date: 9/5/2018

NEW FEATURES

  • Added support for Axient® Digital with ADX Series transmitters
  • Added support for SBC220 Networked Docking Chargers

IMPROVEMENTS

  • Support added for systems in Frequency Diversity Combined mode to enforce 1 MHz frequency separation from each channel of a Frequency Diversity pair
    • This includes the G57+ band for Axient Digital A band receivers.
  • Removed TV 53 from the Japanese TV map.
  • Numerous performance enhancements for the Monitor View and Timeline, including the resolution of issues that may have caused excess memory usage or application lagging.
  • General bug fixes

KNOWN ISSUES

  • Exporting TV exclusions to Spectrum Managers when a TV Channel Width other than 6 MHz can result in improper TV range exclusions.
  • ULX-D receivers running firmware version 2.0.28 or earlier may trigger a Settings Conflict when rediscovered after updating their firmware to version 2.1 or later. There is no issue with the device – there was simply a new property added in version 2.1. To dismiss the alert, resolve the Settings Conflict by selecting the properties you wish to keep.
  • Audio Summing reported from ULX-D receivers reports an Audio Overload on all channels instead of on the specific channel(s) experiencing the overload.
  • Timeline System Events displayed when using the Axient Digital FD-Override (in FD-S, selecting to Lock to Rx 1/2/Auto Switch) do not get displayed on both FD channels.
  • Timeline System Events displayed for Active Transmitter Online for ULXD6/8 transmitters do not always include Transmitter Device ID in the event description.
  • On Macs, when users open show files and launch the Frequency Analysis dialog (by checking the checkbox and pressing “Analyze”), the Frequency Coordination tab may stop responding to keyboard inputs (for example, editing or deleting frequencies with the keyboard). To work around this issue, select another tab in the application (e.g.: Inventory or Monitor) and then reselect the Frequency Coordination tab.
  • SLX and ULX frequencies in Master List mode cannot be manually entered in the Coordination Workspace. They can, however, be coordinated and analyzed.
  • When scanning with AXT400 receivers, the Band Preset value in the Live Scan Settings dialog does not always stay in sync with the currently selected band of the receiver. The Band Preset can be manually changed to scan any supported range.
  • Alerts logged when devices first come online may list device parameters and their values as they are being discovered even though the parameter values themselves have not changed.
  • Certain bodypack portables are not compatible with SBC220 (P3RA, P9HW, and UR5), in that the charging status and other attributes cannot be remotely monitored from WWB. These bodypack portables will still be charged when using SBC220, but viewing the charge percentage or other attributes of those batteries will not be available from WWB.

NOTES

  • To operate Wireless Workbench successfully, you must run it as an administrator. (Consult your IT department if you have questions.)
  • Tags that have been added to a show file but are not assigned to any devices are not saved within the show file.
  • Opening show files created with older versions of Wireless Workbench may result in the Settings Conflicts dialog opening once the file has loaded. This is due to newly supported hardware parameters that have been introduced with updated firmware versions. To maintain all settings from the show file, select "Keep all settings from: Wireless Workbench".
  • On machines running Windows 7, Wireless Workbench will not be able to discover devices when the machine has fallen back to its 169.254.xxx.yyy fallback IP address, regardless of the IP addressing of the connected Shure devices.  To address this, perform one of the following:
    • Insert a DHCP server onto your network and set your machine and Shure devices to accept automatic IP addressing.
    • Statically assign your machine's IP address to the 169.254.xxx.yyy fallback subnet with a different IP address than the one it fell back to originally.

Загрузки

Загрузки

Отзывы

Отзывы

Совместимые продукты

Совместимые продукты

Совместимые продукты

Совместимые продукты

Материалы по теме

Материалы по теме

Вас также может заинтересовать ...

Вас также может заинтересовать ...